Your Professional Thermal Interface Materials Supplier
MCOTI Technology Co., Ltd., established in 2008, is a professional electronic adhesive supplier. The company is committed to providing comprehensive solutions including adhesive materials, curing and dispensing equipment for electronic equipment and automotive parts assembly.
In terms of products, MCOTI specializes in the production of adhesives, industrial glues, electronic adhesives, dispensing equipment, adhesive curing equipment and other products, and provides customers with excellent customized solutions and services.
-
![Thermal Silicone Grease]()
Thermal Silicone GreaseThermal silicone grease is a high-performance, thermally conductive material typically made from silicone oil mixed with thermal fillers (such as aluminum oxide, boron nitride, etc.). It has -
![Thermal Interface Gel]()
Thermal Interface GelThermal gap filler gel is a viscous substance with high thermal conductivity that is widely used in thermal management systems of electronic devices. -
![Thermal Gap Filler Material]()
Thermal Gap Filler MaterialThe mechanism of action is to fill the interface of the electronic device with a liquid polymer that has not yet cured, either manually or automatically. -
![Thermally Conductive Epoxy Adhesive]()
Thermally Conductive Epoxy AdhesiveThe performance of thermally conductive epoxy adhesive currently used for fixed bonding of thermosensitive devices, power devices, etc. on the market is either low in thermal conductivity or -
![Thermally Conductive Acrylic Adhesive]()
Thermally Conductive Acrylic AdhesiveThermally conductive acrylic adhesive is an adhesive with high thermal conductivity, which is widely used in thermal management of electronic equipment.
Our Service
Technical Communication
CTQ : Understand the customer’s application and determine key performance requirements.
Problem Resolution: Provide technical data such as product physical properties, weather resistance, conductivity/thermal performance, and compliance certifications.
Case Sharing: Share successful solutions from previous projects to offer insights for similar applications.
Technical Support
On-Site Guidance: Offer on-site assistance when needed to support adhesive application, curing, and process optimization.
Application Training: Train the customer’s technical team on adhesive usage and quality control to enhance their application capabilities.
Problem-Solving: Quickly address issues such as adhesion failure or curing anomalies during the usage process and propose effective solutions.
MCOTI Low Thermal Resistance thermally conductive gels Product Recommendations
Typical Products:
·BLT: 70-180μm (Bubble size)
·Color: Light Blue,Pink or Black(Bubble color)
|
Products |
Appearance |
Flow Rate g/min |
Specific Gravity |
BLT μm |
Thermal Conductivity W/(m-K) |
Features |
|
N-Sil 8735B |
Black |
80 |
3.2 |
76 |
3.7 |
Excellent processability |
|
N-Sil8745 |
Pink |
75 |
3.4 |
70 |
4.6 |
Printable gel |
|
N-Sil 8745B |
Black |
60 |
3.2 |
70 |
4.2 |
High flow rate High reliability |
|
N-Sil8745H |
Pink |
45 |
3.4 |
75 |
4.6 |
Anti-sagging Anti-spilling |
|
N-Sil 8762 |
Light Blue |
16 |
3.5 |
130 |
6.0 |
High thermal conductivity |
|
N-Sil8780 |
Light Blue |
15 |
3.3 |
180 |
8.0 |
High thermal conductivity |
·Excellent thermal conductivity
·Grease-like products can be screen printed
·These products show the following characteristics due to their excellent heat and cold resistance:
1.High dropping point
2.Less oil separation and lower volatile matter
3.Good stability against thermal oxidation
4.Good stability against consistency changes
5.No solidification at temperatures under ０°C
Key characteristics and uses of thermal gel
Thermal Conductivity:
Thermal gel is formulated with materials that have high thermal conductivity. These materials allow heat to flow more efficiently from the hot component to the heat sink, which then dissipates the heat into the surrounding air.
01
Eliminating Air Gaps:
Air is a poor conductor of heat, and even microscopic air gaps between the component and the heat sink can hinder effective heat transfer. Thermal gel fills in these gaps, ensuring a more direct thermal path for heat to travel.
02
Smooth Interface:
Thermal gel helps create a smooth and continuous interface between the component and the heat sink. This helps to minimize thermal resistance, which is essential for effective heat dissipation.
03
Non-Curing Properties:
Unlike some other thermal interface materials like thermal adhesives, thermal gel remains soft and does not cure over time. This property allows for easy reapplication or removal of the heat sink when needed.
04
Electrically Non-Conductive:
Most thermal gels are electrically non-conductive to prevent short circuits between electrical contacts on the component and the heat sink.
05
Thermal gel is used in various applications, including:
CPU and GPU Cooling: It is commonly used to enhance the thermal interface between central processing units (CPUs) and graphics processing units (GPUs) and their respective heat sinks in computers and gaming consoles.
Power Electronics: Thermal gel is used in power electronic devices such as power transistors and rectifiers to improve heat dissipation.
LED Lighting: In high-power LED applications, thermal gel is employed to improve thermal management and prolong the life of LEDs.
Automotive Electronics: Thermal gel is used in various automotive electronic components to enhance thermal performance and reliability.
Industrial Applications: It is used in various industrial electronic devices and control systems to manage heat generated during operation.
Our Certificate
FAQ
We're professional thermal interface materials manufacturers and suppliers in China, specialized in providing high quality customized service. If you're going to buy thermal interface materials made in China, welcome to get free sample from our factory.
Bonding panels, Coupled Seals, Lid sealPopular Products
